Corvette V8-6.2L (2008)
Body Control Module: Service and Repair
Door Control Module Replacement
Door Control Module Replacement
Removal Procedure
1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side (See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Panel/Service and Repair) .
Important: The door control module is part of the power window regulator and is serviced as an assembly.
2. Remove the window regulator. Refer to Door Window Regulator Replacement (See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Window Regulator/Service and Repair) .
Installation Procedure
1. Install the window regulator to the door. Refer to Door Window Regulator Replacement (See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Window Regulator/Service and Repair) .
2. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side (See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Panel/Service and Repair) .
3. Refer to Control Module References (See: Testing and Inspection/Programming and Relearning) for programming and setup information.
