Corvette V8-6.2L (2008)
1. Coat the threads of the oxygen sensor 2 with the anti-seize compound P/N 5613695, or the equivalent if necessary.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the bank 2, oxygen sensor 2 (4), in the catalytic converter.
Tighten the bank 2, oxygen sensor 2 to 41 N.m (30 lb ft).
3. Reconnect the bank 2, oxygen sensor 2 (4), electrical connector to the engine wiring harness electrical connector.
4. Lower the vehicle.