Corvette V8-6.2L (2008)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine (Vent)
Evaporative Emission Hoses/Pipes Replacement - Engine (Vent)
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Service Intervals) .
2. For vehicles equipped with automatic transmission, remove the right muffler . Refer to Exhaust Muffler Replacement - Right Side (See: Engine,
Cooling and Exhaust/Exhaust System/Muffler/Service and Repair) .
3. Disconnect the vent hose (2) from the evaporative emission (EVAP) vent valve (1).
4. Remove the clamp from the vent hose.
5. Remove the right rear wheelhouse panel. Refer to Rear Wheelhouse Liner Panel Replacement (See: Body and Frame/Fender/Rear Fender/Rear
Fender Liner/Service and Repair) .
6. Remove the EVAP canister access cover.
7. Disconnect the vent hose from the EVAP canister.
8. Remove the vent hose.
9. Cap the EVAP vent valve and the EVAP canister in order to prevent possible EVAP system contamination.
Installation Procedure