Corvette V8-6.2L (2008)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement - Left Side
Fuel Level Sensor Replacement - Left Side
Removal Procedure
Important: DO NOT handle the level sender on the resistor card. Oils from human contact can damage the card.
1. Remove the module from the fuel tank. Refer to Fuel Tank Fuel Pump Module Replacement - Left Side (See: Fuel Delivery and Air
Induction/Fuel Pump/Service and Repair) .
2. Press on the 3 connector position assurance (CPA) lock tabs (1) and slide downward.
3. Disconnect the electrical connector from the module.
4. Remove the sender wires from the connector.
