chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 3063 > < Diagram Information and Instructions|Page 3061
Page 90
background image

SIR/SRS Wiring Repairs

SIR/SRS Wiring Repairs

Tools Required

J-38125 Terminal Repair Kit

The Supplemental Inflatable Restraint (SIR) System/Supplemental Restraint System (SRS) requires special wiring repair procedures due to the sensitive
nature of the circuitry. Follow the specific procedures and instructions when working with the SIR/SRS, and the wiring components, such as connectors
and terminals.

Important:  Do not use the terminals in the kit in order to replace damaged SIR/SRS system terminals. Use either an SIR/SRS pigtail or a
terminated lead from the SIR Repair Kit Tray.

The tool kit J-38125  contains the following items:

*

DuraSeal splice sleeves, in order to repair the SIR/SRS wiring

*

A special crimping tool

*

A heat torch

*

An instruction manual

The DuraSeal splice sleeves have the following 2 critical features:

*

A special heat shrink sleeve environmentally seals the splice. The heat shrink sleeve contains a sealing adhesive inside.

*

A cross hatched (knurled) core crimp provides the necessary low resistance contact integrity for these sensitive, low energy circuits. 

The J-38125  also serves as a generic terminal repair kit. The kit contains the following items:

*

A large sampling of common electrical terminals

*

The correct tools in order to attach the terminals to the wires

*

The correct tools in order to remove the terminals from the connectors

SIR/SRS Connector Repair (Plastic Body and Terminal Metal Pin) 

The terminals in the SIR/SRS system are made with a special plating. This plating provides the necessary contact integrity for the sensitive, low energy
circuits. Use theJ-38125  SIR/SRS Terminal Repair Kit for repairing SIR/SRS terminals and connectors. Do not substitute any other terminals for those
in the repair kit.

The J-38125  SIR/SRS Terminal Repair Kit contains:

*

Various terminated leads for sensing and diagnostic module (SDM) terminal replacement

*

Various connector positive assurance (CPA) locks for SIR/SRS connectors

*

Base of steering column pigtail connectors part number 12085514

*

Yellow vinyl electrical tape

Diagram Information and Instructions|Page 3063 > < Diagram Information and Instructions|Page 3061