Corvette V8-6.2L (2008)
1. Position the ECM.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the ECM bolts (2).
Tighten the bolts to 10 N.m (89 lb in).
3. Connect the engine wiring harness electrical connectors (1) to the ECM.
4. Install the wheelhouse filler panel. Refer to Front Wheelhouse Liner Replacement (Rear Liner) (See: Body and Frame/Fender/Front Fender/Front
Fender Liner/Service and Repair)Front Wheelhouse Liner Replacement (Front Liner) (See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair) .
5. If a new ECM is being installed, program the ECM. Refer to Control Module References (See: Testing and Inspection/Programming and
Relearning) .