Corvette V8-6.2L (2008)
5. Remove the multifunction turn signal switch assembly (1).
Installation Procedure
Important: The electrical contact must rest on the turn signal cancel cam assembly.
1. Install the multifunction turn signal switch assembly (1) to the steering column assembly.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the 2 pan head tapping screws (1).
Tighten the screws to 7 N.m (62 lb in).
3. Route the wire harness assembly along the steering column jacket assembly.
