Corvette V8-6.2L (2008)
1. Install the CKP sensor.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the CKP sensor retaining bolt.
Tighten the CKP sensor to 25 N.m (18 lb ft).
3. Connect the CKP sensor electrical connector.
4. Install the starter. Refer to Starter Motor Replacement (See: Starting and Charging/Starting System/Starter Motor/Service and Repair) .
5. Lower the vehicle.
6. Connect the negative battery cable.
7. Program the transmitters. Refer to Transmitter Programming (N. America and Japan, except Canada) (See: Testing and Inspection/Programming
and Relearning)Transmitter Programming (Canada and Europe) (See: Testing and Inspection/Programming and Relearning) .
8. Perform the CKP System Variation Learn Procedure. Refer to Crankshaft Position System Variation Learn (See: ) .