Corvette V8-6.2L (2008)
Impact Sensor: Service and Repair
Inflatable Restraint Side Impact Sensor Replacement
Inflatable Restraint Side Impact Sensor Replacement
Removal Procedure
Caution: Refer to SIR Inflator Module Handling and Storage Caution (See: Restraint Systems/Service Precautions/Technician Safety
Information/SIR Inflator Module Handling and Storage Caution) .
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair) .
2. Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side (See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Panel/Service and Repair) or Front Side Door Trim Panel Replacement - Right Side (See: Body and
Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair) .
3. Remove the retaining bolts from the inflatable restraint side impact sensor.
4. Remove the sensor from the vehicle.
Installation Procedure