Corvette V8-6.2L (2008)
Negative: Service and Repair
Battery Positive and Negative Cable Replacement (6.0L)
Removal Procedure
1. Disconnect the negative cable lead from the battery. Refer to Battery Negative Cable Disconnection and Connection (6.0L) (See: Service and
Repair)Battery Negative Cable Disconnection and Connection (7.0L) (See: Service and Repair) .
2. Disconnect the positive cable lead (2) from the battery.
3. Remove the battery positive cable to fuse/relay center nut (6) and disconnect the cable (5) from the stud.
4. Remove the battery ground cable nut (4) and disconnect the cable (3) from the stud.
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Service Intervals) .
6. Remove the battery positive/negative cable to engine bolt (3).
7. Remove the positive battery cable to starter solenoid nut and disconnect the cable (1) from the stud.