Corvette V8-6.2L (2008)
Starter Motor: Service and Repair
Starter Motor Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution (See: Battery/Service Precautions/Technician Safety Information/Battery Disconnect Caution) .
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (6.0L) (See: Battery/Battery Cable/Service
and Repair)Battery Negative Cable Disconnection and Connection (7.0L) (See: Battery/Battery Cable/Service and Repair) .
2. Remove the right catalytic converter. Refer to Catalytic Converter Replacement - Right Side (6.0L) (See: Engine, Cooling and Exhaust/Exhaust
System/Catalytic Converter/Service and Repair/Catalytic Converter Replacement - Right Side (6.2L))Catalytic Converter Replacement - Right
Side (7.0L) () .
3. Remove the positive battery cable nut.
4. Remove the positive battery cable terminal and the engine harness leads from the solenoid.
5. Remove the S terminal nut (2).
6. Remove the purple wire lead (1) and washer from the solenoid.
7. Support the starter motor.
8. Remove the starter motor bolts.
9. Remove the starter motor.
Installation Procedure
1. Position the starter motor to the block.
