Corvette V8-6.2L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the starter motor bolts.
Tighten the starter motor bolts to 50 N.m (37 lb ft).
Important: Orient the purple lead wire to the 10 o'clock position when installing.
3. Install the starter motor S terminal washer and purple lead wire (1).
4. Install the S terminal nut (2).
Tighten the S terminal nut to 4 N.m (35 lb in).
Important: Orient gray and rust harness leads to the 6 o'clock and 7 o'clock position.
5. Install the gray and rust harness leads to the solenoid.
6. Install the positive battery cable terminal to the solenoid.
7. Install the positive battery cable nut.
Tighten the positive battery cable nut to 8 N.m (71 lb in).
8. Install the right catalytic converter. Refer to Catalytic Converter Replacement - Right Side (6.0L) (See: Engine, Cooling and Exhaust/Exhaust
System/Catalytic Converter/Service and Repair/Catalytic Converter Replacement - Right Side (6.2L))Catalytic Converter Replacement - Right
Side (7.0L) () .
9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (6.0L) (See: Battery/Battery Cable/Service
and Repair)Battery Negative Cable Disconnection and Connection (7.0L) (See: Battery/Battery Cable/Service and Repair) .
