Corvette V8-6.2L (2008)
Telescoping Wheel Motor: Service and Repair
Telescope Actuator Assembly Replacement
Telescope Actuator Assembly Replacement
Tools Required
J 42640 Steering Column Anti Rotation Pin
Removal Procedure
Caution: Refer to SIR Caution (See: Restraint Systems/Service Precautions/Technician Safety Information/SIR Caution) .
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Air Bag(s) Arming and Disarming/Service and Repair) .
2. Insert J 42640 into the bottom of the lower trim cover.
3. Remove the driver side knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair) .
4. Remove the following items from the jacket assembly:
1. Retaining ring (1)
2. Compression spring (2)
3. Shoulder bolt (3)
4. Housing support guide (4)
5. Disconnect the cable assembly (2) from the telescope drive motor assembly (1).
6. Remove the retaining screws (4) from the telescope actuator assembly (3).
7. Remove the telescope drive bolt (1) and ball (2) from the actuator assembly.
