Corvette V8-6.2L (2008)
Ride Height Sensor: Service and Repair
Electronic Suspension Rear Position Sensor Replacement
Electronic Suspension Rear Position Sensor Replacement
Removal Procedure
1. Turn OFF the ignition switch.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Service Intervals) .
3. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
4. Disconnect the electronic suspension control (ESC) position sensor harness connector.
5. Disconnect the position sensor link from the control arm link stud.
6. Remove the position sensor mounting bolt.
7. Remove the position sensor from the vehicle.
Installation Procedure
