Corvette V8-6.2L (2008)
1. Install the position sensor to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the position sensor mounting bolt.
Tighten the bolt to 7 N.m (62 lb in).
3. Connect the position sensor link to the control arm link stud.
4. Connect the ESC position harness connector.
5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
6. Lower the vehicle.