Corvette V8-6.2L (2008)
11. Connect the front TOC inlet and outlet lines to the rear TOC inlet and outlet lines.
12. Install the floor panel tunnel reinforcement. Refer to Floor Panel Tunnel Panel Reinforcement Replacement (See: Body and Frame/Exterior
Moulding / Trim/Underbody Cover/Service and Repair) .
13. Lower the vehicle.
14. Check the transmission fluid level, add fluid if necessary.
Transmission Fluid Cooler Upper Pipe Replacement - Rear to Differential Cooler
Transmission Fluid Cooler Upper Pipe Replacement - Rear to Differential Cooler
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Service Intervals) .
2. Lower and support the rear of the exhaust.
3. Install a drain pan under the vehicle.
Important: Cap or plug the open transmission fluid cooler pipes immediately to prevent system contamination.
4. Disconnect the rear transmission fluid cooler upper pipe from the transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect
Fitting Disconnection and Connection (See: ) .