Corvette V8-6.2L (2008)
6. Loosen the visible clutch pressure plate bolts.
7. Rotate the engine flywheel.
8. Repeat steps 7 and 8 until all the bolts have been loosened.
9. Remove the visible clutch pressure plate bolts.
10. Rotate the engine flywheel.
11. Repeat steps 10 and 11 until all the bolts have been removed.
12. Remove the clutch pressure plate bolts from the flywheel.
13. Remove the clutch pressure plate and the clutch driven plate.
Installation Procedure
1. Inspect the clutch pressure plate and the clutch driven plate for wear or damage. Repair or replace as necessary.
2. Inspect the engine flywheel. Refer to Engine Flywheel Replacement (See: Flex Plate/Service and Repair/Engine Flywheel Replacement) .
3. Adjust the clutch pressure plate, if necessary. Refer to Clutch Pressure Plate Adjustment (Tremec 6-Speed) (See: Pressure Plate/Adjustments) .
4. If reusing the clutch pressure plate, align the previously created mark on the flywheel with the alignment mark on the pressure plate.
5. Install the clutch driven plate and clutch pressure plate to the engine flywheel.
6. Install the visible clutch pressure plate bolts finger tight.
