Corvette V8-6.2L (2008)
7. Remove the clutch hose connection retaining clip (1).
8. Separate the clutch hose (3) from the clutch master cylinder connection (2).
9. Protect both hose coupling ends from dirt and damage.
10. Remove the driveline support assembly and transaxle from the vehicle. Refer to Driveline Support Assembly Replacement (See: Drive/Propeller
Shafts, Bearings and Joints/Torque Tube/Service and Repair/Removal and Replacement/Driveline Support Assembly Replacement) .
11. Remove the clutch hose connection retaining clip (1).
12. Separate the clutch hose (2) from the clutch actuator cylinder.
13. Protect both the hose and actuator cylinder from dirt and damage.