Corvette V8-6.2L (2008)
3. Inspect the shafts for the following conditions:
*
Unusual wear
*
Grooved, worn, or damaged splines
*
Damaged C-clip grooves
Clutch Discs and Plates
1. Clean the discs and plates with solvent.
2. Inspect the discs and plates for the following conditions:
*
Unusual wear, scoring, or grooves on the separator plate friction surfaces (1)
*
Friction plates with uneven wear or worn friction material (2)
If any one plate or disk in either the left or right pack show signs of wear or scoring replace the complete pack on both sides.
*
Bent or warped plates or discs
