Corvette V8-6.2L (2008)
5. Install the J 42168-11 (2), bearings (3 and 6), spacer (5), J 42168-2 (7), and bolt (1) to the pinion housing/cage (4). Tighten the bolt until snug.
6. Install the pinion housing/cage assembly (2) into the differential housing.
The use of M8 x 1.25 dowels or long bolts will ease in pinion housing installation and alignment.
Important: ALL of the pinion housing/cage bolts must be installed in order to obtain an accurate measurement and correct shim
selection.
7. Install the pinion housing/cage bolts (1).
Tighten the bolts to 30 N.m (22 lb ft).
