Corvette V8-6.2L (2008)
Pinion Gear: Service and Repair
Drive Pinion Assemble
Drive Pinion Assemble
Tools Required
*
DT-48007 Spline Holder
*
J 42170 Getrag Axle Bearing Race Installer
*
J 42172 Getrag Axle Bearing Race Installer
1. Install the bearing onto the pinion shaft using the J 42170 (1), the DT-48007 (2), and a hydraulic press.
2. Assemble the pinion shaft (5), spacer (3), and bearing (2) into the housing/cage (4).