Corvette V8-6.2L (2008)
Important: Friction discs and separator plates develop specific wear patterns and are a matched set. During disc and plate removal, the
components must be retained in the specific order in which they were removed.
9. Remove the left clutch pack from the left case.
*
Remove the separator plates (1).
*
Remove the friction discs (2).
*
Remove the bellville washer (3).
10. Tag the clutch pack to indicate the position of the components.
11. Install the J-42159-A (3) onto the left differential side bearing.
12. Using the J-42159-A (3), the J 42162 (2), and the J 8433 (1) or a hydraulic press, remove the left side bearing from the differential.
