Corvette V8-6.2L (2008)
Ring Gear: Service and Repair
Ring Gear and Differential Housing Assemble
Ring Gear and Differential Housing Assemble
Tools Required
*
J 42162 Getrag Axle Side Gear Compressor
*
J 42170 Getrag Axle Bearing Race Installer
*
J 42173 Getrag Axle Ring Gear Holder
Important: Friction discs and separator plates develop specific wear patterns and are a matched set. During disc and plate installation,
the components must be installed in the specific order in which they were removed.
1. Install the right clutch pack to the right case.
*
Install the separator plates (3).
*
Install the friction discs (2).
*
Install the bellville washer (1).
