Corvette V8-6.2L (2008)
7. Install the flex plate spindle, with bearing, into the rear bearing housing.
8. Press the flex plate spindle, with bearing (1), into the housing (2). Support the inner race of the housing bearing when assembling the components.
9. Install the hub (1) onto the flex plate spindle. Align the marks on the flex plate spindle and hub for proper assembly.
10. Apply threadlock GM P/N 12345382 (Canadian P/N 10953489), or equivalent, to the threads of the spindle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
11. Install the nut (1) to the flex plate spindle.
Tighten the spindle nut to 90 N.m (66 lb ft).
Propeller Shaft Installation
