Corvette V8-6.2L (2008)
12. Wrap a shop towel around the joint outer race splined shaft.
13. Place the outer race vertically in a bench vise.
14. Make a ball accessible for removal.
Tap gently on the joint cage, using a brass drift and a hammer, in order to drive a ball toward the bottom of its track. The opposing ball will be
made accessible for removal.
15. Remove the exposed ball.
Use a small screwdriver to aid in removal if necessary.
16. Position the cage and inner race so they are level.
17. Repeat steps 14 through 16 in the removal sequence as shown until you remove all six balls.
18. Position the cage and the inner race 90 degrees to the centerline of the outer race.
19. Align the cage windows with the lands of the outer race.
20. Lift to remove the cage and the inner race from the outer race.
