Corvette V8-6.2L (2008)
9. Remove the rearview mirror. Refer to Inside Rearview Mirror Replacement (Except DD8) (See: Body and Frame/Mirrors/Service and
Repair/Inside Rearview Mirror Replacement (Except DD8))Inside Rearview Mirror Replacement (DD8) (See: Body and Frame/Mirrors/Service
and Repair/Inside Rearview Mirror Replacement (DD8)) .
10. Perform the appropriate step:
*
For the coupe, install the roof lift-off panel.
*
For the convertible, raise and close the folding top.
11. Close the door windows.
12. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
13. Close the hood.
Windshield Reveal Molding Replacement
Windshield Reveal Molding Replacement
The windshield reveal molding is an applied molding design separate from the window . The reveal molding is bonded by to the windshield and may be
bonded to the body. The reveal molding may be replaced with the windshield as an assembly, or the reveal molding may be available as a separate
service part. Refer to Adhesive Installation of Stationary Windows (See: Windows/Service and Repair/Adhesive Installation of Stationary Windows) .
Windshield Side Reveal Molding Replacement (Coupe and Convertible)
Windshield Side Reveal Molding Replacement (Coupe and Convertible)
Removal Procedure
1. Remove the windshield weatherstrip side retainer. Refer to Weatherstrip Side Retainer Replacement (Hardtop) (See: Body and Frame/Doors,
Hood and Trunk/Doors/Front Door/Front Door Weatherstrip/Service and Repair)Weatherstrip Side Retainer Replacement (Coupe and
Convertible) (See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Weatherstrip/Service and Repair) .
