chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Folding Top Headlining Trim Panel Replacement|Page 11509 > < Folding Top Headlining Trim Panel Replacement|Page 11507
Page 9
background image

15. Remove the screw (1) from the end of the string, under the convertible top.
16. Disconnect the rear defogger wires.
17. Remove the headliner by sliding it through the numbers 2, 3, and 4 bows. Slide the headliner material simultaneous.

Installation Procedure

1. Install the headliner material by sliding it into the the number 2, 3, and 4 bows.

1. Start the material approximately 1 inch into the number 2,  3 and 4 bows.
2. Slide the material simultaneously with in the bows to avoid binding.

Folding Top Headlining Trim Panel Replacement|Page 11509 > < Folding Top Headlining Trim Panel Replacement|Page 11507