Corvette V8-6.2L SC (2009)
Service Procedure
1. Unlatch and raise the folding top.
2. Remove the folding top seal compression panel (2) from the number one bow of the folding top. Do not discard the five screws (1) removed from
the folding top seal compression panel.
3. Discard the folding top seal compression panel.
Caution
Do not over torque the five screws into the number one bow.
4. Install the new folding top seal compression panel to the number one bow of the folding top. Tighten the five screws to 6 Nm (60 lb in).
5. Lower and latch the folding top.
Courtesy Transportation - For US and Canada
The General Motors Courtesy Transportation program is intended to minimize customer inconvenience when a vehicle requires a repair that is covered
by the New Vehicle Limited Warranties. The availability of courtesy transportation to customers whose vehicles are within the warranty coverage period
and involved in a product program is very important in maintaining customer satisfaction. Dealers are to ensure that these customers understand that
shuttle service or some other form of courtesy transportation is available and will be provided at no charge. Dealers should refer to the General Motors
Service Policies and Procedures Manual for Courtesy Transportation guidelines.
Claim Information
1. Submit a claim using the table below.
2. Courtesy Transportation - submit as Net Item under the repair labor code.
Customer Notification - For US and Canada
General Motors will notify customers of this program on their vehicle (see copy of customer letter shown in this bulletin).
Customer Notification - For Export
