Corvette V8-6.2L SC (2009)
3. Position a tool between the inner and outer brake pads to prevent the remaining brake caliper pistons from being forced from the caliper bores.
4. Using the C-Clamp from the CH-47954 - Caliper Seal Installer , hold the brake pad opposite the piston to be removed from the caliper.
5. Apply filtered, non lubricated compressed air to the brake hose fitting inlet port.
6. Remove the piston (1) from the caliper.
7. After opposing inboard and outboard pistons have been removed, repeat Steps 3-6 for the remaining brake caliper pistons.
8. Using a plastic tool, carefully remove the dust seal (2) from the caliper body.
9. Using a plastic tool, carefully remove the piston seal (3).
