Corvette V8-6.2L SC (2009)
Brake Fluid Level Sensor/Switch: Service and Repair
Brake Fluid Level Indicator Switch Replacement
Removal Procedure
1. Disconnect the brake fluid level indicator switch electrical connector.
2. Carefully compress the brake fluid level indicator switch locking tabs on the inboard side of the master cylinder reservoir.
3. Remove the brake fluid level indicator switch (1).
Installation Procedure
1. Install the brake fluid level indicator switch (1).
Ensure the brake fluid level indicator switch locking tabs fully engage the master cylinder reservoir.
2. Connect the brake fluid level indicator switch electrical connector.
