Corvette V8-6.2L SC (2009)
Parking Brake Warning Switch: Service and Repair
Parking Brake Indicator Switch Replacement
Removal Procedure
1. Remove the console. Refer to Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair).
2. Remove the passenger seat. Refer to Driver or Passenger Seat Replacement (See: Body and Frame/Seats/Service and Repair/Driver or Passenger
Seat Replacement).
3. Lift and disengage the retainer clips on the park brake lever boot.
4. Lift the park brake lever slightly until it engages the first stop.
5. Remove the park brake lever assembly mounting bolts.
6. Disconnect the electrical connector from the park brake switch.
7. Position the park brake lever assembly to the rear of the vehicle.
8. Remove the park brake switch.
Installation Procedure