Corvette V8-6.2L SC (2009)
1. Install the park brake switch to the park brake lever assembly.
2. Position the park brake lever assembly to the driveline tunnel.
3. Connect the electrical connector to the park brake switch.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the mounting bolts to the park brake lever assembly.
Tighten the park brake lever assembly mounting bolts to 28 Nm (21 lb ft).
5. Position the park brake lever assembly boot to the driveline tunnel.
6. Install the park brake lever assembly boot nuts.
Tighten the park brake lever assembly boot nuts to 10 Nm (89 lb in).
7. Install the passenger seat. Refer to Driver or Passenger Seat Replacement (See: Body and Frame/Seats/Service and Repair/Driver or Passenger
Seat Replacement).
8. Install the console. Refer to Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair).
9. Release the park brake lever.
