Corvette V8-7.0L (2007)
TRIP
The TRIP button is used in order to scroll the following DIC menus
*
Odometer
*
Trip Odometer
*
Elapsed Time
*
Average Speed
*
Oil Life Remaining
Odometer
-
The odometer shows how far your vehicle has been driven in either miles or kilometers. Press the TRIP button to display odometer readings, such
as:
*
ODOMETER 12345 MI or
*
ODOMETER 20008 km
The odometer can be displayed by turning on the parking lamps.
Trip Odometers
-
There are two trip odometers. Press the TRIP button to display TRIP ODOMETER A readings and press the button again to display TRIP
ODOMETER B readings, such as:
*
TRIP ODOMETER A 130.5 MI or
*
TRIP ODOMETER A 209.9 km
*
TRIP ODOMETER B 300.5 MI or
*
TRIP ODOMETER B 483.5 km
Both of the trip odometers can be used simultaneously. TRIP A could be used to track the distance to a destination. TRIP B could be used to track
maintenance periods. The trip odometers can be reset by pressing the RESET button on the DIC.
There is also a miles since last ignition feature that displays the number of miles (kilometers) driven since you last started the vehicle. Press and hold the
RESET button for three seconds, then release it. The miles (kilometers) since the last ignition cycle will be set into the trip odometer.
Elapsed Timer
-
Press the TRIP button until ELAPSED TIMER is displayed, such as ELAPSED TIMER.00.
When the ignition is in on, the DIC can be used as a stopwatch. The display can show hours, minutes and seconds. The elapsed time indicator will record
up to 23 hours, 59 minutes and 59 seconds, then it will reset to zero and continue counting. The display appears as ELAPSED TIMER.00 in the
elapsed time function.
You can start or stop the elapsed time by pressing the RESET button. To reset the elapsed time to zero, press the RESET button for three seconds while
the timer is displayed.
Pressing and holding the RESET button for at least 10 seconds will reset the timer display to the time since last ignition cycle.
Average Speed
-
Press the TRIP button until the average speed is displayed, such as:
*
AVERAGE SPEED 62 MPH or
*
AVERAGE SPEED 100 km/h
Press and hold the RESET button to reset to 0.0 mph (km/h).
Engine Oil Life
-
Press the TRIP button until the engine oil life is displayed, such as OIL LIFE REMAINING 89%.
This is an estimate of the engine oil's remaining useful life. It will show 100% when the system is reset after an oil change. It will alert you to change
your oil on a schedule consistent with your driving conditions. When the remaining oil life is low, the system will alert you with the message CHANGE
ENGINE OIL.
Reset the engine oil life system yourself after each oil change. Refer to GM Oil Life System Resetting.
OPTION
The OPTION button allows you to access the PERSONAL OPTIONS menu and customize the personalization settings on your vehicle. Refer to the
owners manual for the vehicle personalization settings.
RESET
