Corvette V8-7.0L (2007)
Important: Recommended wire alloy is 5356 and wire size is .035. The shielding gas is 100 percent Argon.
A 2 minute cooling down period is recommended for every 2 minutes or 100 mm (4 in) of welding.
5. Using a P-MIG welder, weld (1) the bumper bar to the top of the rear frame rails duplicating the factory welds.
6. Using a P-MIG welder, weld (1) the bumper bar to the bottom of the rear frame rails duplicating the factory welds.
