Corvette V8-7.0L (2007)
1. Install the brake caliper mounting bracket to the knuckle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the two NEW brake caliper mounting bracket bolts and washers.
The new brake caliper mounting bracket bolts will come with an adhesive already applied to the threads.
Tighten the front brake caliper mounting bracket bolts to 175 N.m (125 lb ft).
3. Lubricate the brake caliper pin bolts with high temperature silicone lubricant.
4. Install the brake pad retainers (1) to the brake caliper bracket (3).
5. Install the brake pads (2) to the brake caliper bracket (3).
6. Install the brake caliper.
Rear Brake Caliper Bracket Replacement
Rear Brake Caliper Bracket Replacement
Removal Procedure
Caution: Refer to Brake Dust Caution in Service Precautions.
