Corvette V8-7.0L (2007)
1. Bench bleed the master cylinder.
2. Install the master cylinder to the brake booster.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the master cylinder mounting nuts.
Tighten the master cylinder mounting nuts to 29 N.m (21 lb ft).
4. Remove the plugs from the brake pipes
5. Connect the brake pipes to the master cylinder.
Tighten the brake pipe fittings at the master cylinder to 24 N.m (18 lb ft).
6. Connect the electrical connector (1) to the brake fluid level sensor.
7. Bleed the hydraulic brake system.
