Corvette V8-7.0L (2007)
Important: If the oil cap is removed from the cover, install a NEW cap during assembly.
7. Remove the oil cap (424) and seal (450) from the cover, only if replacement is required.
8. Discard the oil cap.
Installation Procedure
Important:
*
All gasket surfaces should be free of oil and other foreign material during assembly.
*
DO NOT reuse the valve rocker arm cover gasket.
*
The valve rocker arm cover bolt grommets may be reused.
1. Install a NEW gasket (1) into the valve rocker cover lip.
