Corvette V8-7.0L (2007)
7. Remove the valve rocker arm wear pad (234) - intake valves ONLY.
8. Remove the valve stem keys (225).
9. Carefully release the valve spring tension.
10. Remove the J 38606.
11. Remove the valve spring cap (224).
12. Remove the valve spring (223).
13. Remove the valve stem oil seal (222).
Installation Procedure
1. Clean the cylinder head valve spring seat area.
2. Install the valve stem oil seal (222).
Important: The valve stem oil seal alignment and position on the valve guide is critical.
An improperly installed valve stem oil seal may lead to excessive oil consumption, and increased vehicle emissions.
