Corvette V8-7.0L (2007)
Idler Pulley: Service and Repair
Drive Belt Idler Pulley Replacement
Removal Procedure
1. Remove the accessory drive belt.
2. Loosen the drive belt idler pulley mounting bolt.
3. Remove the drive belt idler pulley.
Installation Procedure
1. Position the drive belt idler pulley on generator mounting bracket.
2. Hand tighten the drive belt idler pulley mounting bolt.
Notice: Refer to Fastener Notice.
3. Tighten the drive belt idler pulley bolt.
Tighten the drive belt idler pulley bolt to 50 N.m (37 lb ft).
4. Install the accessory drive belt.
