Corvette V8-7.0L (2007)
Important: Before installing the new oil filter, ensure that the old oil filter gasket has been removed. If not, remove the old gasket.
Notice: Refer to Fastener Notice.
1. Install the oil filter to the engine block.
Tighten the engine oil filter to 30 N.m (22 lb ft).
2. Install both oil pan drain plugs.
Tighten the oil pan drain plugs to 25 N.m (18 lb ft).
3. Lower the vehicle.
Important: DO NOT use any engine oil additives in Corvette engines.