Corvette V8-7.0L (2007)
6. Remove the inlet hose to oil pan bolt (3) and disconnect the hose (2) from the oil pan. Discard the oil seal (1).
7. Remove the oil inlet hose.
Installation Procedure
1. Position the oil inlet hose.
Notice: Refer to Fastener Notice.
2. Install the oil inlet/outlet hose bracket bolt.
Tighten the oil inlet/outlet hose bracket bolt to 22 N.m (16 lb ft).
3. Using a new oil seal (1) install the oil inlet hose (2) and bolt (3) to the oil pan.
Tighten the inlet hose to oil pan bolt to 22 N.m (16 lb ft).
