Corvette V8-7.0L (2007)
7. Inspect the CMP sensor O-ring seal (704) for cuts or damage. If the seal is not cut or damaged, it may be used again.
8. Lubricate the O-ring seal with clean engine oil.
9. Install the O-ring seal onto the sensor (703).
10. Install the sensor to the cover.
11. Install the CMP sensor and bolt (705).
Tighten the bolt to 12 N.m (106 lb in).
12. Connect the CMP sensor electrical connector.
13. Install the water pump.
14. Install the crankshaft balancer.
15. Install the A/C drive belt and tensioner.
16. Install the accessory drive belt.
