Corvette V8-7.0L (2007)
Important: In necessary, gently rotate the HVAC module forward to engage the HVAC module studs through the corresponding holes
on the cowl.
10. Align the following components to the corresponding openings on the cowl:
*
The heater core joint fitting
*
The evaporator joint fitting
*
The HVAC module drain
*
The HVAC module studs
11. Install the bolts retaining the HVAC module to the upper I/P cross vehicle beam.
Tighten the bolts to 5 N.m (44 lb in).
Important: To prevent possible water leaks or wind/road noise from entering the vehicle passenger compartment, do not reuse the old
HVAC module retaining and sealing nuts.
