Corvette V8-7.0L (2007)
4. Install the heater cover screws.
Tighten the screws to 1.6 N.m (14 lb in).
5. Reposition the HVAC wiring harness and connect the wiring harness to the heater core cover wiring harness retainer (1).
6. Reposition the HVAC wiring harness and connect the wiring harness to the heater core cover wiring harness retainer (3).
7. Connect the HVAC module wiring harness retainer pin (2) to the HVAC module.
8. Connect the DTM sensor electrical connectors.
9. Install the HVAC module.
