Corvette V8-7.0L (2007)
Fluid - M/T: Service and Repair
Transmission Fluid Level Inspection
Transmission Fluid Level Inspection
1. Raise and suitably support the vehicle; ensure that the vehicle is level. Refer to Vehicle Lifting.
2. Clean any dirt from around the fill plug hole.
3. Remove the transmission fluid fill plug hole.
4. If equipped, disconnect the transmission fluid temperature (TFT) sensor electrical connector.
5. Clean any dirt from around the TFT sensor.
6. If equipped, remove the TFT sensor from the transmission.
7. Inspect the transmission fluid level. Ensure that the fluid level is even with the bottom of the fill plug hole.
8. Add Dexron(R) - VI transmission fluid, if necessary.
Notice: Refer to Component Fastener Tightening Notice.
9. If equipped, install the TFT sensor to the transmission.
Tighten the TFT sensor to 27 N.m (20 lb ft).