Corvette V8-7.0L (2007)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine (Chassis)
Evaporative Emission Hoses/Pipes Replacement - Engine (Chassis)
Removal Procedure
1. Disconnect the engine purge pipe (1) from the chassis purge pipe (2).
2. Cap the engine purge pipe in order to prevent possible contamination.
3. Disconnect the chassis fuel and evaporative emission (EVAP) pipe retainer (1) from the upper front of dash mounting stud (3).
4. Raise the vehicle.
5. Remove the exhaust intermediate pipe.
6. Remove the driveline tunnel closeout panel.
