Corvette V8-7.0L (2007)
Fuel Supply Line: Service and Repair
Fuel Hose/Pipes Assembly Replacement (Left Tank)
Fuel Hose/Pipes Assembly Replacement (Left Tank)
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to the Fuel Pressure Relief.
3. Drain the fuel tanks. Refer to Fuel Tank Draining.
4. Remove the left muffler.
5. Disconnect the tank crossover hose (5) at the left fuel tank.
Notice: Refer to EVAP Pipes and Hoses Notice.
6. Disconnect the evaporative emission (EVAP) pipe (2) at the left tank EVAP pipe (1).
7. Cap the EVAP pipe in order to prevent possible contamination.
Notice:
*
Do not repair the fuel feed or return pipes.
*
Replace the fuel feed and return pipes with original equipment or with parts that meet the GM specifications for those parts. The replacement
pipe must have the same type of fittings as the original pipe in order to ensure the integrity of the connection.
Important: Mark or identify each fuel pipe in order to aid in installing the pipes in their original positions.
Disconnect the auxiliary fuel return pipe (1) from the jet pump to the left tank.
8. Disconnect the fuel return pipe (7) at the fuel filter and pressure regulator.
9. Disconnect the fuel feed pipe (8) at the fuel filter/pressure regulator.
10. Disconnect the auxiliary fuel feed rear pipe (2) from the left tank to the jet pump.