Corvette V8-7.0L (2007)
Fuel Supply Line: Service and Repair
Fuel Hose/Pipes Assembly Replacement (Right Tank)
Fuel Hose/Pipes Assembly Replacement (Right Tank)
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
Notice:
*
Do not repair the fuel feed or return pipes.
*
Replace the fuel feed and return pipes with original equipment or with parts that meet the GM specifications for those parts. The replacement pipe
must have the same type of fittings as the original pipe in order to ensure the integrity of the connection.
Important: Mark or identify each fuel pipe in order to aid in installing the pipes in their original positions.
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to the Fuel Pressure Relief.
3. Drain the fuel tanks. Refer to Fuel Tank Draining.
4. Remove the left and right muffler.
5. Disconnect the tank crossover hose (5) at the right fuel tank and the left fuel tank.
6. Disconnect the evaporative emission (EVAP) pipe (2) at the right tank EVAP pipe (3) and at the left tank EVAP pipe (1).
7. Cap the open pipes in order to prevent possible contamination.
8. Disconnect the auxiliary fuel return rear pipe (1) from the jet pump to the left tank.
9. Disconnect the auxiliary fuel feed rear pipe (2) from the left tank to the jet pump.
10. Remove the right fuel tank shield mount nut (3).
11. Remove the right fuel tank shield mount bolt (2).
12. Remove the right fuel tank shield (1).
