Corvette V8-7.0L (2007)
13. Remove the fuel pipes from the 2 rear upper fuel and EVAP pipe retainers (2).
14. Disconnect the auxiliary fuel return rear pipe (3) from the jet pump to the left tank.
15. Disconnect the auxiliary fuel feed rear pipe (2) from the left tank to the jet pump.
16. Remove the auxiliary fuel return rear pipe from the jet pump to the left tank.
17. Remove the auxiliary fuel feed rear pipe from the left tank to the jet pump.
18. Cap the fuel sender pipes and the left tank fuel pipes.
Installation Procedure
Important: Lubricate the fuel pipes in order to aid in installation. Use mechanic's wire attached to the fuel sender end of the fuel pipe in
order to pull the fuel pipe through the tunnel reinforcement opening. Pull the fuel pipe through from the top down.
1. Install the auxiliary fuel feed rear pipe (2) from the left tank to the jet pump.
2. Install the auxiliary fuel return rear pipe (3) from the jet pump to the left tank.
3. Remove the caps from the pipes.
4. Connect the auxiliary fuel return rear pipe (3) from the jet pump to the left tank.
5. Connect the auxiliary fuel feed rear pipe (2) from the left tank to the jet pump.
Notice: Refer to Fastener Notice.
