Corvette V8-7.0L (2007)
1. Install the CKP sensor.
Notice: Refer to Fastener Notice.
2. Install the CKP sensor retaining bolt.
Tighten the CKP sensor to 25 N.m (18 lb ft).
3. Connect the CKP sensor electrical connector.
4. Install the starter.
5. Program the transmitters. Refer to Transmitter Programming (Domestic and Japan) Transmitter Programming (Export - Including Canada), See:
Testing and Inspection/Programming and Relearning
6. Perform the CKP System Variation Learn Procedure. Refer to Crankshaft Position System Variation Learn. See: